Analysis essay Example | Topics and Well Written Essays - 750 words - 1

Analysis - Essay Example 5. Certain policies of the government that might affect the economy and hence, the market or industry under consideration. One reason why it becomes very important to consider GDP in case of UK is that UK is a developed country. The infrastructure and the high end technology available in UK come at a higher cost than that in the developing countries. The expenditure increases due to non-availability of cheap labor. Thus, to support the ‘relatively’ high manufacturing costs, the GDP should be ‘relatively’ higher so that the profit is not affected. The GDP of UK was severely affected by recession. Though a lot of newspapers reported the rise in GDP by more than 0.4% in the fourth quarter last year, the GDP had dipped by 6% during recession (The Herald 2010). Does that mean that the spending has declined? Not much. The savings ratio has been declining along with the decline in GDP (guardian.co.uk 2010). Hence, the spending of citizens of UK has not been affected much. But another factor to worry about is the increase in VAT (Value Added Tax). To reduce the fiscal deficit, which went up during recession, the UK government has increased Value Added Tax from 15% to 17.5% (Dalong 2009). All confectionery items are VAT-able items. The cost of chocolates will increase. But how much will this affect the consumption of chocolates? To gain popularity in the UK confectionery market, it would be sensible to sell chocolates at a lower profit margin rather than increasing the prices because of the increase in VAT. ‘Cadbury’s’, which enjoyed a share of more than 30% of the UK confectionery market until last year, made the mistake of increasing the price of its ‘Dairy Milk’ bars. This led to a drop in the consumption of Cadbury’s products and their market shares dropped. Thus, it would be sensible to sell chocolates at lower price until the brand gains popularity and recognition and until UK completely recovers from reces sion (tutor2u 2009). The

Education for Everyone Essay Example | Topics and Well Written Essays - 500 words

Education for Everyone - Essay Example James Agee still seems to be relevant when we see a large number of students of the other races finding it difficult to meet resources to get an education. This is against the achievements of the colored people which they got during the 1960s.Both Walker Evans and James Agee have stressed on changes in fundamental attitudes of people. They deal with the subject with an unusual approach and depict the very ‘soul’ of the suffering humanity. They reject the status quo values of the society and want a new way of addressing the social issues of life. This amalgamation of a photographer and an author, literally as well as symbolically, depicted the precarious and agonizing situation recurring in the society.The work led President Roosevelt to formulate a new Law in favor of tenants after the President’s re-election for the second term. The work, Let Us Now Praise Famous Men, impressed people as well as the President and the distressed people of the society got their rig hts. Same kind of innovative literary and artistic works are required to bring even more reforms in the society so as to make education of all kinds accessible to all in equal terms. Agee’s delineation of the tenant depression and Walker’s photographs of the families made it clear before the public that everything was not right in the country, and America needed reformation process. Agee wrote carefully at different social issues; for example, he did not criticize the laws and schools which children attended sporadically.

Personal Income Taxes Essay Example | Topics and Well Written Essays - 500 words

Personal Income Taxes - Essay Example The rich taxpayers are seem to be reporting almost 48.5% of their total income as capital gains and dividends, effectively getting 48.5% of their income taxed at extremely lower rate of 15% compared to that of the low income people. The trend now is that such wealthy taxpayers with more than $10 million continue to report huge increase in their income and get taxed at extremely lower rates. Legendry investor Warren Buffet has complained that he pays much lower tax rates than his secretary. John: I should agree with Mike on this point. Studies have shown that one of the major reasons for income inequality in US is such special tax rates on investment income. While the percentage of capital income is as high as 50% for some of the wealthy, it is as low as 2% for people below the income level of $200,000. In fact, Mitt Romney is reported to have close to $14 million income and the effective tax rate is seemed to be as low as 13.5%. All these instances point to the fact that current tax system just keeps accelerating the income disparity in US. A fix to this is indispensable in order to check this inequality from spreading. One option that the government can consider is to increase the tax rates on investment income. I: Taking it on from John, I should say that is already high time that the government should find a fix for this issue. Effectively, only a higher tax rate can curb the huge tax rate disparity in US. Regarding John’s note on increasing the tax rates on investment income, I should say that it will again adversely affect the small taxpayers who have considerably small percentage of investment income. Increase in the tax rate on such income would effectively leave the small taxpayers with fewer after tax profits. Therefore, a more ideal choice would be to determine the tax break loopholes that allow the rich to lower their income tax percentage and close such

Integrated Marketing Communications Essay Example | Topics and Well Written Essays - 750 words - 2

Integrated Marketing Communications - Essay Example In addition, the modern day consumer prefers an easy, effective and accurate marketing mix that would make their product selection easier. Apple Company is ranked 5th in the 2014 Fortune 500 List. The success of Apple is mainly attributed to the quality of their products. However, Seitel (2011) is of the assumption that the marketing strategies employed by Apple have been of significant impact on the success of the company. The author further points out that the quality of Apple’s products requires integrated marketing communication strategy that would increase awareness of the products in the market (Seitel, 2011). Apple has realized this requirement and developed marketing systems that have increased the ability of its target market to understand its products. This has increased the competitive nature of the company. What are the three most significant IMC tactics used by apple? Are the tactics effective and responsible for the success of the company? The first integrated marketing tool used by Apple is online marketing. Seitel (2011) asserts that Apple has maximized its effectiveness in creating an online marketing platform. For this reason, the tool has been developed to suit the requirement by the market. If one makes a simple internet search for Apple on Google, a massive number of hits are provided that provide a direct link to the Apple website. This makes it easy for a person to learn more about the company. In addition, a consumer is able to search for a specific set of information on the company and a link would be provided to the information required. This has increased the accessibility level of the company. Moreover, the company website is a significant marketing tool. The website is a massive source of information on its products and the company. Significant information provided on the website are information on new products, video manual on how to use

Cross cultural communication Essay Example | Topics and Well Written Essays - 1000 words

Cross cultural communication - Essay Example Cultural differences define the communication, attitude, behavior, decision making process and the leadership style. The impact of these cultural differences on the organization can be understood from the illustration that when a Japanese firm sends its executive to United States as head of operations that executive have to understand the cultural differences of the two countries. Japanese organizational culture can be termed as collectivism where group has priority over individual whereas US is characterized by Individualism. The individual comes before the group. Due to this difference attitude, behavior, motivation, reward and leadership style is altogether different in the two countries. The Japanese not only has to realize the importance of individual reward and individual contributions but also must recognize the potential conflict in individual and group roles in US. Toyota executives had to face these difficulties in acclimatizing to US culture (Griffin). Despite accelerated globalization organizations only managed to transcend boundaries but they were unable to operate beyond nationality. What we observe today is a wide range of cultural differences in work related values, attitudes and behavior. This requires an effective cross culture communication so that these cultural differences and workforce diversity can be utilized to maximize organizational benefits. Hofstede has identified five dimensions of cultural differences which influence organizations. They are namely individualism/collectivism, power distance, uncertainty avoidance, career success/quality of life and Confucian dynamism. Successful organizations explore these differences and take advantage of these differences (Nancy J Adler). Same is done by Toyota. There is huge difference in the organizational culture of the company in Japan and in America but they have managed it very successfully. At the macro level operations of the organization remains the same it is only at the micro level whe re the differences exists and they are exploited to the full advantage of the company. Cross cultural communication differences arise because communication style or preferences are deep rooted in our culture which we learn with experiences throughout our life. Our culture is so much inside us that we expect the whole world to look at it in the same way. Learning a foreign knowledge is not enough for cross cultural communication. Intercultural communication can be improved by developing an understanding of the following three factors. External and internal culture, high context and low context culture and the last is monochromic and polychromic time. Understanding of external culture can be very easily developed through history, politics etc. It is the internal culture which defines our attitudes, behavior and values that creates misunderstandings in most of the cross cultural encounters. This vast difference in the internal culture of the two societies i.e. Japan and USA is a source of many misunderstandings in the organization. Japan has a culture of respect and politeness and they expect the same in return whereas internal culture of USA is more direct, straightforward and frank. High context and low context cultures also define our communication styl

Education and its impacts in students learning Essay Example for Free

Education and its impacts in students learning Essay The paper is about education and how its impacts enhance students learning. Universal access to education is one of the millennium goals of development. The main observations have been made together with the impacts. There is a brief introduction to what education really is. In addition, the essay further concludes by giving recommendations to what should be done to ensure every person has access to learning facilities both in the developing and undeveloped countries. Introduction Education can be termed as wealth of awareness. It can be picked up by a person and passed from one generation to the next after studying a certain subject or undergoing life lessons. It can be said to be a form of learning. Unfortunately, universal access to education has not been completely attained. A great education begins at home hence the kind of a background a child comes from will have an impact on their education. Observations made on education It has been observed that poverty particularly in developing countries is a major cause for education inequality. Secondly, the importance of education in modern world cannot be taken for granted. For instance, some sectors such as the military previously did not put emphasis on education requirements but currently they have raised minimum education requirements. It has also been observed that most countries are adopting modern technology in their learning institutions. There has been an increase in use of electronic devices such as laptops and I pads. More so, learning has been made easier since one can be educated from home through the e-learning. The observations made can be compared to the education indicators as listed by Aud et. al (2013). Impacts on students learning The Social economic status is based on the parent’s level of learning, their profession, earnings and their position in their social order. Parents with a high social economic status are likely to lay a good background for their children education than those of low status. They can afford to buy their children most of education materials they require such as pens, books and toys for young kids to enhance their early schooling. They are also capable of ensuring that their offspring have access to quality health care. In addition, these parents can access information about the well performing schools and they can also afford to pay the fees. On the other hand, parents with low social economic status usually do not have high levels of education hence their children will not be well prepared at home to start schooling unlike those with high social economic status. Gender in most African countries is still an issue to be looked upon. Boys are always preferred when it comes to access to education especially when resources to take children to school are limited. For instance, even if a girl had a better score than a boy, parents in most of African countries will prefer to take the boy for higher learning. Studies have shown that most of the poorest women in most countries have not even completed their primary school. Poverty is another impact on education. Children from poor households are less likely to perform well in class. These children usually have less participation in class, their level of terminology is low hence unlikely to perform well. Their parents cannot afford good nutrition for their kids and as a result, kids may have nutritional related illnesses and their education is disrupted. Parenting is the process of upbringing children. A child’s parent is commonly their first educator. Parents have roles of ensuring that their children are prepared for school, for example by ensuring that they have sufficient food and good health, this is necessary for a child concentration in class which results to good performance. It is at home that parents mostly emphasis on virtues such as hard work, integrity and commitment. The Society also has an impact on education. Community customs and practices have a great impact on education, which can either be helpful or damaging. For example, communities with traditions that encourage early marriages for girls prevent them from accessing their fundamental right to education. Technology, which is being embraced quite well in most countries, has a great impact on students’ performance. This is majorly for students in higher learning institutions. Students with access internet are able to complete their assignments in time. Most of higher learning institutions have embraced modern technology and they are offering some courses or units online, this is convenient for those students with access to internet because they can take classes at their free time and can also learn at their own pace. Conclusion Social economic status and poverty have the greatest impact on children access to education. Other factors with impact on education are access to technology, parenting, and race among others. These factors may have positive or negative impacts on children access to education. Undesirable effects such as inequality in education can be dealt with by making primary school education free and compulsory. If possible, education at each stage should be made free or affordable to everyone, promoting women education, discouraging child labor and school dropouts. Embracing modern technology improves education quality worldwide. References Aud, S. , Wilkinson-Flicker, S. , Kristapovich, P. , Rathbun, A. , Wang, X. , Zhang, J. , National Center for Education Statistics, (2013). The Condition of Education 2013. NCES 2013- 037 . National Center For Education Statistics, accessed on 24th May 2013.

Automation of Plastic Grinding Plant using HMI and PLC

Automation of Plastic Grinding Plant using HMI and PLC CAREER EPISODE: 03 INTRODUCTION: 3.1) The career episode three presents an extensive description of the project Automation of plastic grinding plant using HMI and PLC. This project was part of my industry internship Project 2 in the final semester, as well as a requirement to complete my degree, Bachelor of Engineering (Electronics and Communication)from Gujarat Technological University, India. I started this project with a team of three engineers including myself and a project trainer. The project duration was five months which included project training, implementation and testing. We worked as Electronic engineer interns in Mega Switchgears, India for this project. BACKGROUND: 3.2) In most of the small-scale industries the fault detection is done through manual means i.e. a lot of time is spent in identifying the exact point of error/failure in a particular system. It is a very exhausting task for the operator to check each and every machine in order to locate the error. To make work easier for the workers, we made an arrangement that displays a message on the HMI (Human Machine Interface) display which indicates the location of the error. 3.3) In this project, our main objective was to develop an automation system for a plastic grinding plant using HMI and PLC (Programmable Logic Controller). With the help of this automation system, we were able to monitor and control the plant from a remote location. In other words, status of each module could be monitored without going to the location of the plant and also it sends a message or alert with the location of the error whenever there is a problem or failure in the plant. 3.4) My roles and responsibilities included: Programming of PLC using WPL software Simulation of Plastic Grinding plant on HMI using Screen Editor software Assisting in designing the hardware prototype of plastic grinding plant Maintaining neat and organized electrical connection between different components Discuss future tasks and assess every team members work in weekly meetings. Maintain technical documentation. 3.5) Project mechanism PERSONAL ENGINEERING ACTIVITY 3.6) For this project, we went through an extensive training program for five months and simultaneously we completed our project implementation as well as the testing. We were working as interns in the organization. This training gave us an insight to the technical culture of an electronic industry. During this internship, we came across many new electric components such as PLC and HMI and learnt new approaches to design an electronic circuit in an organized manner as per IEEE design standards. I was trained by the project trainer in programming the PLC and HMI using different softwares. As a team, we were trained in designing and implementing the prototype of an automated plastic grinding system. During our training, we were also given lessons on safety measures to avoid hazardous situations. For a safety environment, we were provided gloves, clothes and glasses to design electronic circuit and mechanical hand. 3.7) Hardware Implementation We started with the designing of the prototype, discussed regarding the work process of the system and selection of components. In this project, we used DVP12SA PLC which was selected under the guidance of our project trainer and depending upon the application of the project. It consists of 8 input ports and 4 output ports. PLC is programmable controller which comprises of a microprocessor, input and output module, memory and power supply. It behaves according to the status of the input and output ports which depends upon the stored program in the memory of the PLC. Therefore, we decided to use PLC for our project. For the controlling and status condition of each module of the plant, I have used 8 channel and 4 channel relay cards, toggle switches and indicator lamps. Relay card is a device on which relay is mounted and can be used for controlling purpose, toggle switches for controlling certain aspects of the machines and indicator lamps are used for indication purpose of plant cond ition. These lamps have very good visibility.RS232 cable is used as a programming cable and RS485 is used to interconnect the PLC and HMI. To provide efficient power, in this project we have incorporated SMPS (Switched Mode Power Supply) Hardware Implementation with the mimic of the plant 3.8) Furthermore to automate the plastic grinding plant, we have also used Delta (DOPB07S211) HMI. I decided to use HMI in our project because it allows you to design the perfect plant diagram using a software and shows on the display screen. This made it really easy for me for the simulation process as well as monitoring the point plant from a remote location. The key feature of HDMI is to detect the exact location of the fault in the plant whenever any abnormal condition occurs such as If any motor will trip due to any abnormal condition then motor and related device process will stop and hooter gets ON, that gives a warning to the operator with audible sound. Operator can also verify which motor is tripped by visual indication on mimic by indicator lamps. 3.9) Software Implementation For software implementation, I was trained by our project trainer for two months. I used WPL Editor for PLC programming. This software is capable of providing 3 languages i.e. Ladder (LAD), Instruction (IL) and Sequential Function Chart (SFC).ÂÂ   It was easy to use the software but it was as difficult to program the PLC because the programming was implemented depending upon the various conditions of the plant and in those situations what action should be taken. After every minor implementation, I used to verify the action of the PLC in order to complete the programming successfully. For this project, I used Ladder language to program the PLC. 3.10) The second software which I was trained for was Screen Editor. I used screen editor to design the mimic diagram of plastic grinding plant with touch buttons that were used to control each module of the plant. This software is comparatively much lucid than WPL Editor software. I also incorporated colour code system for various fault condition such as follows: REDFeedback/Input is not given in system GreenSystem is running smoothly with no fault conditions YellowInterlocking the problem in the system Screen EditorHMI Display SUMMARY: 3.11) In the end after the implementation and documentation, we presented our project with the automated prototype of plastic grinding plant and gave a presentation in front of our faculty. The overall journey of this project was very productive in terms of learning, acquiring knowledge and enhancing technical skills. I faced many tough situations while pursuing this project such as programming the PLC and constructing the prototype but working under the guidance of our project trainer and as a team, made the project look easily achievable. For future prospective, system can be controlled using a computer at remote location by connecting HMI with an ethernet cable, record of faults occurring in the system can be recorded in the excel sheet and the system can be also password protected.